Denon ADV-1000 Operating Instructions Manual page 46

[2] Playing in the Dolby Pro-Logic 11 mode ............................................................................................................. (All function)
• Playback is performed according to the 2-channel mode and PL]] CINEMA, PLI MUSIC and PRO LOGIC mode parameter settings.
• ApplicaUe sources
• Digital inputs (TWDBS and V.AUX functions, including DVD
playback discs)
Dolby Digital 2-channel sources
PCM 2-channel sources (except 96 kHz PCM)
• 2-channel analog input sources (a/ functions)
/,2
2,32
--2
© @" --1
® ® ......
0000
--4
Oooo
1
Select the input function.
FUNCTION FUNCTEON
/SELECT
Main unit Remote control unit
-_ Dolby Pro Logic 11 playback is not possible in the digital
input function (DVD, TV/DBS or V.AUX) "DTS" input mode.
Set the AUTO DECODE Surround mode.
SURROUND FUNCTION SURROUND
MODE / SELECT
Main unit Main unit Remote control unit
"_ If the mode is set to anything other than AUTO DECODE,
the AUTO DECODE mode can be set using the AUTO
DECODE/2CH MODE button on the main unit.
Play a program source with the rll[aaLmtumm,m_] mark
or a 2-channel source.
• The source is played according to the Dolby Pro Logic ]l
mode setting.
• The Dolby Pro-Logic 1! indicator lights when in the CINEMA
and MUSIC modes
DBPROLOGICJI-_- Lit
• In the Dolby Pro-Logic mode, the Dolby Pro-Logic indicator
lights
BEIPRO LOGIC4_-- Lit
The mode can be changed during playback by changing the
2-channel mode (surround parameter) or by pressing the
AUTO DECODE/2CH MODE button.
Set the surround parameters
5_R_ PARA
according to the selected mode.
Refer to steps 1 to 3 at "Setting
the parameters in the PLH
CINEMA, PLII MUSIC and PRO _.
LOGIC modes" (page 43). Remote control unit
46