Denon ADV-1000 Operating Instructions Manual page 44

• In the auto decode mode it is possible to play in the Dolby Digital or DTS Surround mode, depending on the format of the input signal
• it is also possible to play in the Auto Stereo, Dolby Pro-Logic I[ Cinema/Music or Dolby Pro-Logic mode, according to the 2-channel mode setting.
[1] Dolby Digital and DTS surround playback
(digital inputs only)
• Applicable sources
• Digital inputs (TV/DBS and V.AUX functions, including DVD
playback discs)
Dolby Digital multi-channel sources
DTS sources
/,3
O o o ! _ O OOOO©
3 3
--3
2
O(_G --1
i Q
..... ® ®
_:E) ® . (E)_O
oood
Od©©
000@ --5
©oo©
Select the digital input function {DVD or TV/DBS or VAUX
digital input]
FUNCTION FUNCTION
/SELECT
Main unit Remote control unit
Set the surround mode to "AUTO DECODE"
SURROUND FUNCTION
MODE / SELECT
Main unit Main unit
SURROUNB
Remote control unit
if the mode is set to anything other than AUTO DECODE,
the AUTO DECODE mode can be set using the AUTO
DECODE/2CH MODE button on the main unit.
Play a program source containing the or
nn_--q
DlOlfAI-
mark.
• The Dolby Digital indicator lights rTIDIGITA L 4_-Lit
when playing a Dolby Digital
source.
• The DTS indicator lights when ,BT8, _--Lit
playing a DTS source.
-_ The mode is selected automatically according to the
format of the source being played.
Display the surround parameters for
the source
The surround parameters are also
displayed on the screen when the
function is set to DVD
SURRpARA
Remote control unit
6
Select the various surround parameters and set them.
-_ The display returns to normal if no operation is performed
for 4 seconds while the parameters are displayed
Remote control unit
• D COMP. setting
[ CU iP,,
L
Set the input mode to "AUTO"
DTS sources can also be played in
the input mode "DTS".
INPUTMODE
Remote control unit
This parameter is not displayed when playing DTS
source.
44