Denon ADV-1000 Operating Instructions Manual page 24

• This section describes surround-related setup operations.
For DVD-related setup operations, see page 73
• The setup operations cannot be performed while discs are playing. Set the stop mode first.
I _ 0 O00OO o
2
Refer to "CONNECTIONS" (pages 8 to 15) and check that all
connections are correct.
Turn on the power
Press the POWER switch (button).
ON/STANDBY
Light
(green)
m
4
m
0000
_G,®+ ®,,®
N_Ce_L S_LS
6oo /
oooo/
5
Main unit Remote control unit
When pressed, the power turns on and the display lights. The sound
is muted for several seconds, after which the unit operates normally.
When pressed again, the power turns off, the standby mode is set
and the display turns off.
Whenever the ON/STANDBY button is in the STANDBY state, the
apparatus is still connected on AC line voltage. Please be sure to
unplug the cord when you leave home for, say, a vacation.
Press the SETUP button.
SETUP
] DENON
OUICK SETUP J
L<ADVA_CE_ _ETUP_J
_V__ETU_ J
_tEtEtEtEtEtEtEtEtEtEtEtEtEtEtEtEtEtEtEtEtEtEtEtEtEt_
Remote control unit
4
Use the /_. end V cursor bu_ons
on the remote control unit to select the
setting menu.
• There are three types of setup
menus
Remote control unit
Quick system settings: Select "ROOM SPACE" and "SEATING
POSITION".
System setting changes: Detailed settings of the AV system
function.
DVD setting changes: Detailed settings of the DVD function.
Press the ENTER button to display
the setting screen of the respective
IY_enu.
Remote control unit
24