Denon ADV-1000 Operating Instructions Manual page 70

Description of timer
• The timer can be used to switch the power between the ON and
STANDBY (OFF) modes once every day at the same time.
(Everyday timer)
• The timer can be used to play DVDs, CDs or TUNER
Before setting the timer
• Set the current time.
Be careful to set the right time.
Checking the timer settings
• Use the same procedure as when setting the timer to check the
timer settings.
_) Press the TIMER/SET button for at [east 2 seconds to set the
timer setting mode.
_2._ Now press the TIMER/SET button again repeatedly to display
the timer start function, the start time and end times.
_3) After the end time (minutes) is displayed, the timer standby
setting is displayed, and when the TIMER/SET button is pressed
again the display returns to as it was before the timer was set.
Changing the timer settings
• Reset the timer using the new settings.
• The previous settings are cleared when they are replaced with the
new settings.
Clearing the timer settings
• With "Step 4 to 12" displayed, press the TIMER/SET button for at
least 2 seconds. All the timer settings are cleared.
• Press the TIMER/SET button again for a least 2 seconds, the
display returns to as it was before the timer was set
Turning the timer off
• Press the TIMER/SET button, and when "TStdby" is displayed,
turn the FUNCTION/SELECT dial to select "OFF" (The dispIay's
(_ mark turns off)
If there is a power failure
• if there is e power failure or if the power cord has been unplugged,
the clock display flashes once the power comes back on, the clock
resumes counting, and if the timer was set the timer operates
according to the clock Be sure to correct the current time setting.
Example: To listen to a CD from 12:35 p.m. to 12:56 p.m.
4,6,8,10,12,14
[
LT2L=. -- ooooo I ,
,,,6 z3,,,,,8,,,,,3,,5
• Perform this operation after setting the current time (steps 1 to 7
on page 69).
Turn on the power
• Load e CD into the main unit for the
purpose of timer play.
ON/STANDBY
Main unit
Press the TIMER/SET button for at least 2 seconds.
• If the time is set, "EVERYDAY" is displayed.
TIMEPdSET
iZ" i i LtTLt__ J i'%tZI L ._
Main unit
-_ "SET TIME" is displayed when the time setting has not
been made. Perform operations 3 to 7 of Page 69, then
perform the timer setting again
Press the TIMER/SET button
• "Timer FUNC" is displayed
TIMER/SET
Main unit
Setting the timer start function.
Set the function to "DVD"
_ i_!_:i '' _*.,.*._*.
FUNCTION
/SELECT
O
Main unit
Press the TIMER/SET button
• The timer setting mode is set and the timer start time
setting can be made
TiMEPdSET
Main unit
7O