Denon ADV-1000 Operating Instructions Manual page 56

• The quality of the picture when playing discs can be adjusted.
t
2,3,4
When playing a disc with the function set to DVD, press the k-/_
DISPLAY button to turn on the on-screen display, use the _%. and
V
cursor buttons to select "Picture Quality", then I_ I_
press the ENTER button. . ,
• The picture quality adjustment screen appears. Remote control unit Remote control unit
• The on-screen display also turns on when the DISPLAY button
is pressed in the stop mode. Remote control unit
2
Use the A and V cursor buttons to select the item, then press the ENTER
button.
STANDARD:
The picture quality and functions are all reset to the standard values set upon
shipment from the factory.
SHARP:
The picture is sharper.
SOFT:
The picture is softer with less no_se
MEMORY 1 to 3:
You can make three _mage quality adjustments and store them at memory
places 1 to 3 (Set in step 3)
Use the A and V cursor buttons to select the item, then press the ENTER
button.
• If memory 1 to 3 was selected in step 2, the selected memory settings are
displayed.
• With interlace images, the contrast, brightness, sharpness and hue can be
adjusted and stored in the memory.
CONTRAST 1-6 to +6):
Adjusts the contrast between bright and dark parts of the picture
BRIGHTNESS 10to +12):
Adjusts the picture's brightness.
SHARPNESS 1-6 to +6):
Adjusts the picture's contours
HUE (-6 to +6):
Adjusts the balance between green and red. {This setting does not affect
progressive scan outputs)
• With progressive images (D terminal), the sharpness and gamma correction can
be adjusted and stored in the memory
SHARPNESS 1-5 to +7):
Stresses the outlines of the _rnage.
GAMMA (-6 to +6):
Select this if the dark parts of _mages are obscure or the bright parts are
brighter than necessary.
Remote control unit
Remote control unit
56