Denon ADV-1000 Operating Instructions Manual page 12

• When making connections, also refer to the operating instructions of the other components.
• The video signals input to the VIDEO input {yellow) and S-Video input jacks are not output to the color difference (component) video jacks
Color component output connectors (PB/CR, PB/CB and Y}
The red (PR/CR), blue (PB/CB) and brightness (Y) signa+s are output independently, achieving more faithful
reproduction of the colors.
• The color component input connectors may be marked differently on some TVs or monitors (PB, PB and Y/R-
Y, B-Y and Y/CR, CB and Y, etc.). For details, refer to the TV's operating instructions.
Connect in this way if your TV is compatible with Progressive Scan.
++!t+++ + ..... °°°°°+++++ .....
t ....... d#++,,,+,, ,,_,+++3 ....... ,d+"_+ J#, ,L,++s j i_+_11_1
r. ==_ I ©©©©©©,1 _ ......
LRRERJ
......
MONITOR OUT jack
11 +++++++
(component) video input iacks
(COMP©NENT VIDE© INPUT) to the
COMPONENT MONIT©R OUT iack
using 75 _/ohms coaxial video pim
_ plug cords
NOTES:
• Use the three commercially available video cords to connect the ADV-1OOO's color component output connectors to the TV or
monitor.
• Set the "TV TYPE" in "VIDEO SETUP" in "DVD SETUP" to comply with your TV's video format. When the TV is NTSC formated
set to NTSC.
• Set the "VIDEO OUT" in "VIDEO SETUP" in "SETUP" to comply with Progressive TV. (NTSC formated only)
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE "STANDARD DEFINITION" OUTPUT.
12