Denon ADV-1000 Operating Instructions Manual page 60

• Use this function with video and music CDs to play the tracks in the desired order
• This function does not affect with DVD.
Before operating the remote control unit!
I" Bfe _rr_OeSe_th_ DVDd_nsOd_(_irng
buttons.
O
3
oooool
3--
7--
oooo
@.....
®,O.Q,O
oooo
in the stop mode, press the PROG/DIRECT button once
• The program selection screen appears
_0C_01RECT
Use the number buttons to select the track number you want to
program
EX: To program track 5 and track 12:
Remote control unit
Press 5
(number button)
Press +10
(number button)
Press 2
(number button)
(DOG
C)C)G
@C)
Remote control unit
Press the PLAY button.
• Playback of the tracks in the programmed order begins.
Main unit Remote control unit
To return to normal playback:
Press the STOP (m) button to stop programmed playback, then press the PROG/DIRECT button.
Now press the PLAY (1_) button to start normal playback from the beginning of the disc
-_ To clear tracks from the program:
Press the STOP (m) button. The program play screen appears Press the CLEAR button to clear the last track in the program.
To clear the entire program:
The entire program is cleared when the power is turned off, the function is changed or the disc is ejected.
Also, when the STOP (m) button is pressed to stop programmed playback and the PROG/DIRECT button is pressed, the entire program
is cleared.
TO check the programmed contents, press the CALL button The programmed contents are displayed step by step.
Up to 30 tracks can be programmed.
6O