4.22 HDD cable
4.22 HDD cable
To remove the HDD cable, follow the steps below and refer to Figure 4-31.
1. Peel off the insulator and disconnect the HDD cable from the connector CN1850 on
Installing the HDD cable
To install the HDD cable, follow the steps below and refer to Figure 4-31.
1. Connect the HDD cable to the connector CN1850 on the system board and stick the
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Downloaded from
www.Manualslib.com
the system board.
Figure 4-31 Removing the HDD cable
insulator.
manuals search engine
Insulator
CN1850
4 Replacement Procedures
HDD cable
[CONFIDENTIAL]
4-51