Wiring Diagram - FPI P36D-NG Owners & Installation Manual

INSTALLATION
This heater does not require a 120V A.C.
supply for operation. In case of a power failure,
the burner switch and the optional remote
control/thermostat will continue to operate.
Nut
Star washer
#8 Ground Lug
(for mobile home)
Lockwasher
Fan
ground wire
White
Burner ON
OFF
Red
Thermostat
Black
Caution: Ensure that the wires do
not touch any hot surfaces and are
away from sharp edges.
40

WIRING DIAGRAM

However, a 120V A.C. power supply is needed
for the fan/blower operation.
(Do not cut the ground terminal off under
any circumstances.)
Pilot
Assembly
Piezo
Ignitor
(To THTP)
(To TH)
T-Stat
ON OFF
Remote Receiver
or Thermostat
(Millivolt) (Optional)
CAUTION: Label all wires prior to
disconnection when servicing con-
trols. Wiring errors can cause im-
proper and dangerous operation.
NOTE: Even if the fan is not purchased
Ground
Neutral
Live
Ground
120V AC
60 Hz
ON
Rotary Speed
Control
Brown
White
To Thermocouple IN
"S.I.T" Valve
Remote Transmitter
(Optional)
FPI P36D Zero Clearance Direct Vent Gas Fireplace
with the unit, it is still a good idea
to bring power to the receptacle
box (provided with the unit) in case
the fan is installed at a later date.
Fan
Green
OFF
Black Red Red
Fan Thermodisc
(normally open)
Gas
In