Arch Screen Door - FPI P36D-NG Owners & Installation Manual

Framing & Finishing
A non-combustible material 12" (305mm) above the Arch and 6"
(153mm) on each side must be used. The Arch Screen Front also
requires steel stud framing above and on each side of the unit (refer
to
Diagram 1).
Note: The facing material has to go on after the unit is set.
1) Remove Glass Door. Refer to P36 Manual.
2) Remove 2 screws and bracket as indicated.
Remove bracket
Remove both screws
Diagram 2
FPI P36D Zero Clearance Direct Vent Gas Fireplace
ARCH SCREEN DOOR INSTALLATION
Diagram 1
REGENCY OPTIONSIONS
3) Install On/Off switch.
Diagram 3
4) Place bracket under the Flange. Secure with 2 screws as indicated
in Diagram 4.
Diagram 4
5) Loosen the 3 x #8 Phillips Head Screws located on the inside top
of the outer frame of the appliance.
3 x #8 Phillips
On/Off Switch
Control
Mounting
Bracket
51