FPI P36D-NG Owners & Installation Manual page 50

REGENCY OPTIONS
3) Install the hinges to the hinge brackets on the left and right side of
the bottom of the outer frame, secure using 2 x #8 Philips Head
Screws per hinge.
4) Place the Bottom Grill near hinge. Flip the hinge over the Bottom Grill
and secure with 3 x #8 Philips Head Screws per side.
Bottom Grill
5) Mount the Burner ON/OFF Control Box to the left side of the Bottom
Grill using 2 x #8 - 1/4" Philips Head Screws.
Left Side
of Bottom
Grill
Burner ON/OFF
Control Box
Loosen the 3 screws which secure the Right Side Hinge Bracket to
the Bottom Grill. Place the keyholes in the Restrain Bracket through
the screws and slide the Bracket to the right. Tighten the screws to
secure bracket in place.
50
6) Slide the Top Grill into the louver brackets located on the inside top
Hinge Location
7) Install the Left and Right Side Screen Doors in the fully open position
8) Close screen doors.
Right Side
of Bottom
Grill
of the firebox. Push in place.
Top Grill
by placing over top of the hinges on the Full Screen Door Frame.
NOTE: Failure to install the doors in the fully open position could result
in paint damage to the surface of the door.
Hinge
Screen Door
FPI P36D Zero Clearance Direct Vent Gas Fireplace
Restrain
Bracket
Hinge
Bracket