Hampton Cast Grills - FPI P36D-NG Owners & Installation Manual

1) Remove the 3 faceplate mounting phillips head screws from the inside
top of firebox, and discard if necessary.
2) Place top grill in brackets located inside top of firebox as shown.
Bracket
Top Grill
3) Remove hinge brackets on bottom left and right side of firebox by
removing 2 screws and discard brackets only.
4) Install new hinge brackets using the same 2 screws removed in step
3.
FPI P36D Zero Clearance Direct Vent Gas Fireplace

HAMPTON CAST GRILLS

5) Install hinge to bracket then secure with screw.
6) Place something underneath bottom grill to prevent scratching.
7) Line up hinge holes in bottom grill holes.
8) Place screws half way in -- do not secure completely.
Bracket inside
top of firebox.
9) Place bracket over screws then push to the side against faceplate
Hinge bracket.
10) Tighten screws. (Screws will easily be tightened if using a stubby
Left side shown.
Black Metallic Grills Only: Mount grill stopper to bottom of firebox
securing with one screw.
New hinge bracket.
Left side shown.
11) Adjust ball plunger if necessary.
HAMPTON OPTIONS
Hinge
Bracket
to lock in place as per diagram.
Bracket
screwdriver.)
Grill
Stopper
55