Memory Card Troubleshooting - Lexmark Pro5500 Series User Manual

Troubleshooting
M
AKE SURE THAT YOU HAVE THE CORRECT MANUAL ANSWER CODE
If you set the printer to receive faxes manually (Auto Answer Off), then you need to enter the correct code when a
fax comes in so that the printer can receive it.
1
From the home screen, navigate to:
> Fax Setup > Ringing and Answering > Manual Answer Code
2
Copy the manual answer code that appears on the touch screen.
Note: The default code is *9*, but for increased security, you can change it to a number that only you know.
Cannot run the fax software
The printer must be connected to a telephone, DSL, VoIP, or cable service before you can configure the fax settings in
the fax software.
M
AKE SURE A FAX DRIVER IS INSTALLED
The fax option is available for use only with the PostScript driver or the Universal Fax Driver. For information on
installing these drivers, see the Software and Documentation CD.
M
AKE SURE THE PRINTER IS CONNECTED TO A TELEPHONE LINE
You need to connect the printer to your telephone line (through a standard wall jack, a DSL filter, a VoIP adapter, or
a cable modem) before you can open the fax software and configure the fax settings.

Memory card troubleshooting

•
"Memory card troubleshooting checklist" on page 153
•
"Nothing happens when a memory card is inserted" on page 153
Memory card troubleshooting checklist
Before you troubleshoot, use the following checklist to solve most memory card problems:
•
Make sure that the memory card you are using can be used in the printer.
•
Make sure the memory card is not damaged.
•
Make sure memory card contains supported file types.
Nothing happens when a memory card is inserted
If the "Memory card troubleshooting checklist" does not solve the problem, then try the following:
R
EINSERT THE MEMORY CARD
The memory card may have been inserted too slowly. Remove and then reinsert the memory card quickly.
153