Lexmark Pro5500 Series User Manual page 92

Faxing
How do I block faxes?
You can block faxes from specific numbers. You can also block junk faxes and faxes from unidentified senders (senders
without a Caller ID). This feature is helpful if you want to receive faxes automatically but want to filter the faxes that
you receive.
Blocking faxes from specific numbers
1
From the home screen, navigate to:
> Fax Setup > Fax Blocking > Turn On/Off > On > Accept
2
Add a number to block.
a
Navigate to:
Block Faxes From > Add a Number to Block > Add a Name
b
Enter the contact name, and then touch OK.
c
Touch Add a Fax Number.
d
Enter the fax number of the contact, and then touch Accept.
e
Touch Accept again.
You can block up to 50 numbers.
Blocking faxes from unidentified senders
From the home screen, navigate to:
> Fax Setup > Fax Blocking > Block No ID > On > Accept
Can I retrieve failed faxes?
The printer saves an incoming fax to the printer memory before it prints the fax. If the printer runs out of ink or runs
out of paper, then you can print the fax later after the error is resolved.
However, you cannot retrieve a failed fax if the failure is due to power loss. In this case, the printer automatically prints
an error report the next time it is turned on. For incoming faxes, the error report lets you know who sent the fax and
how many pages were not printed. For outgoing faxes, it lets you know how many pages were not sent.
92