Copying; Tips For Copying; Making Copies - Lexmark Pro5500 Series User Manual

Copying

Copying
ADF
Use the ADF for multiple‑page documents.
Note: The ADF is available only on select models. If you
purchased a printer without an ADF, then load original
documents or photos on the scanner glass.

Tips for copying

•
Make sure the exit bin is fully extended and the bin extender is flipped out.
•
Use the ADF when scanning two‑sided pages if your printer supports duplex scanning and the ADF supports the
original document size.
•
Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning or the ADF
does not support the original document size.
•
When using the ADF, adjust the paper guides on the ADF to the width of the original document.
•
To easily retrieve a document after copying or scanning, lift the ADF input tray.
•
When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
•
When the document to be copied is in place with the settings you want, press

Making copies

1
Load the original document.
Note: From the home screen, you can press
settings.
2
From the home screen, navigate to:
Copy > More Options > Number of Copies
3
Enter the number of copies you want to print, and then touch Accept.
Scanner glass
Use the scanner glass for single pages, small items (such as
postcards or photos), transparencies, photo paper, or thin
media (such as magazine clippings).
to print one copy of the original document using the default
to start copying.
51