Fax Troubleshooting - Lexmark Pro5500 Series User Manual

200, 20e
Hide thumbs Also See for Pro5500 Series:
Table of Contents

Advertisement

Troubleshooting
M
AKE SURE THE RECIPIENT MAILBOX IS NOT FULL
This causes e‑mail to bounce back to your inbox.

Fax troubleshooting

"Fax troubleshooting checklist" on page 150
"Cannot send faxes" on page 151
"Cannot receive faxes" on page 152
"Cannot run the fax software" on page 153
For detailed descriptions of common terms and tasks, see the following:
"Setting up the printer to fax" on page 69
"Faxing FAQ" on page 86
Fax troubleshooting checklist
If you encounter problems sending and receiving faxes, then check the connection first:
1
Check for a dial tone on the telephone line by plugging an analog telephone into the wall jack, DSL filter, VoIP device,
or cable modem where you connected the printer. Make sure you plug the telephone into the same port.
If you do not hear a dial tone, then contact your line provider.
2
While the printer is connected to the telephone line, check for a dial tone by plugging an analog telephone into the
port of the printer.
If you do not hear a dial tone, then use the checklist below. Listen for a dial tone after checking each item.
If you hear a dial tone but still have problems sending and receiving faxes, then see the other topics in this section.
Connection checklist
Make sure that the printer and other devices on the line (if applicable) are set up and configured correctly according
to your setup scenario.
Make sure that the cables are connected to the correct ports.
Make sure that the cables are securely plugged in.
Check the cable connections for the following hardware, if applicable:
Power supply Answering machine Cable modem Splitter
Telephone
VoIP adapter
If the printer is connected to a Digital Subscriber Line, then make sure you are using a DSL filter for the printer.
If the printer is connected to a VoIP adapter or cable modem, then make sure that the printer is plugged into the
first phone port.
If you are using a splitter, then make sure that you are using a phone splitter. Do not use a line splitter.
DSL filter
RJ‑11 adapter
150

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro5500t

Table of Contents