Understanding The Parts Of The Printer - Lexmark Pro5500 Series User Manual

About your printer

Understanding the parts of the printer

Use the
1 Automatic Document
Feeder (ADF)
2 ADF input tray
3 PictBridge and USB port
4 Card reader light
5 Memory card slot
6 Ink cartridge access door Install, remove, or replace ink cartridges.
7 Paper tray (Tray 1)
8 Second paper tray (Tray
2)
Note: This option is
available only on select
printer models.
To
•
Scan, copy, or fax multiple‑page documents.
•
Access ADF paper jams.
Note: Select printer models allow duplex scanning, copying, or faxing with just a single
pass of a page through the ADF.
Load original documents into the ADF.
Notes:
•
Do not load postcards, photos, small items, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
•
After scanning, copying, or faxing, you can lift the right end of the input tray to
retrieve the original documents easily.
Connect a PictBridge-enabled digital camera or a flash drive to the printer.
Check the card reader status. The light comes on when a memory card is inserted and
blinks when a memory card is being accessed.
Insert a memory card.
Load paper.
Load additional paper.
You can load the same type of paper as in Tray 1. You can also load a different type of
paper and change the default paper settings so the printer uses paper from Tray 2 for
certain types of print jobs.
10