Changing the Size and Orientation of Paper in Tray 2
The following procedure describes how to change the size and orientation of paper in
Tray 2.
1.
Pull out Tray 2 towards you.
Note
2.
Remove the remaining paper.
3.
Slide paper guides towards the front
and back of the tray.
4.
Slide the paper guide to the right.
5.
Load a new stack of paper neatly and
tightly against the left corner of the tray
with the side to be printed facing up.
Important • Do not load mixed types or mixed
Xerox WorkCentre 5016/5020 User Guide
Changing the Size and Orientation of Paper in the Trays
• While the machine processes a
job, do not pull out the tray in use.
sizes of paper together in Tray 2.
• Do not load paper above the
maximum fill line. It may cause
paper jams or machine
malfunctions.
48