Xerox WorkCentre 5020 User Manual page 50

If you do not know in which orientation the paper is loaded in the trays
Note
• If paper is loaded as shown in the diagrams below, the orientation is LEF.
• If paper is loaded as shown in the diagrams below, the orientation is SEF.
• Changing sequence when the measuring unit is in inches
Sequence
1
2
3
4
5
6
7
Note
Xerox WorkCentre 5016/5020 User Guide
need to register the size of the custom paper on the print driver. For more information,
refer to "Specifying the Custom Paper Size" (P.79).
• Load the custom size paper in the Bypass Tray. Do not load the custom size paper in Tray
1 or Tray 2.
What appears
in the Display Orientation
8.5 x 11" /
LEF
8.5 x 11" /
SEF
8.5 x 13.4" /
SEF
A3 / SEF
A4 / LEF
A4 / SEF
B4 / SEF
• When Tray 1 or Tray 2 is selected, [A5] and [55] do not appear in the Display.
Changing the Size and Orientation of Paper in the Trays
Size /
Sequence
8
9
10
11
12
13
14
What appears Size /
in the Display Orientation
B5 / LEF
B5 / SEF
5.5 x 8.5" /
SEF
A5 / SEF
11 x 17" /
SEF
8.5 x 14" /
SEF
8.5 x 13" /
SEF
50