Xerox WorkCentre 5020 User Manual page 95

Error Code
E1
E2
E3
E4
E5
E6
E8
E9
Xerox WorkCentre 5016/5020 User Guide
Description
Paper jammed around the Fuser
Unit and in the Left Side Cover.
Paper jammed in the Left Side
Cover.
Paper jammed in or around Tray 2.
Paper jammed in the Left Side
Cover.
The Left Side Cover or the Front
Cover is open.
Access Cover 1 and Access Cover 2
are open.
Access Cover 1 is open.
Access Cover 2 is open.
When using the N-up feature, the
zoom ratio required to fit the
specified number of pages on a
sheet is beyond the range of 50 -
200%.
When using the N-up feature, there
is a mismatch between the
orientation of the loaded documents
and paper in a tray.
There is a mismatch between the
orientation of the loaded document
and that of paper in a tray.
The zoom ratio required to fit the
image on the paper under the
specified settings is beyond its range
of 50 - 200%.
Fault Clearance Procedure
Remedy
Remove the jammed paper.
For information on how to remove the
jammed paper around the Fuser Unit,
refer to "E1: Paper Jam around the Fuser
Unit and in the Left Side Cover" (P.102).
Remove the jammed paper.
For information on how to remove the
jammed paper in and around Tray 1, refer
to "E2: Paper Jam in the Left Side Cover"
(P.104).
Remove the jammed paper.
For information on how to remove the
jammed paper, refer to "E3: Paper Jam in
Tray 2" (P.107).
Remove the jammed paper.
For information on how to remove the
jammed paper, refer to "E4: Paper Jam in
the Left Side Cover" (P.105).
Close the Left Side Cover or the Front
Cover.
Close Access Cover 1 and Access
Cover 2.
Close Access Cover 1.
Close Access Cover 2.
Press one of the following buttons to
clear the error: the <All Clear> button,
the <Paper Supply> button, the <N-
up/ID Card Copy> button, or the
<Original Size> button.
Press one of the following buttons to
clear the error: the <All Clear> button,
the <Paper Supply> button, the <N-
up/ID Card Copy> button, or the
<Original Size> button.
Press the <Stop> button to cancel the
job.
Press one of the following buttons to
clear the error: the <All Clear> button,
the <Paper Supply> button, <Variable
Zoom Ratio> button, or the <Reduce/
Enlarge> button.This error code can
also be cleared when you remove the
loaded document from the Document
Feeder.
95