C1: Paper Jam In Tray 1 - Xerox WorkCentre 5020 User Manual

Hide thumbs Also See for WorkCentre 5020:
Table of Contents

Advertisement

4.
Remove the jammed paper.
Note
1) If the paper is jammed in the
2) If the paper is jammed in the
3) If the paper is jammed in the
5.
Gently close the Left Side Cover,
Access Cover 2, and Access Cover 1.

C1: Paper Jam in Tray 1

The following procedure describes how to clear paper jams in Tray 1 when an error
code [C1] appears in the Display.
1.
Pull out Tray 1 toward you.
Important • Identify the location of the paper
2.
Remove the jammed paper.
Note
3.
Push Tray 1 gently back into position.
Xerox WorkCentre 5016/5020 User Guide
• Do not leave any torn pieces of paper inside the machine.
location shown in the diagram,
remove the jammed paper pulling
upwards.
location shown in the diagram,
remove the jammed paper pulling
upwards.
location shown in the diagram, and
if the edges of the jammed paper is
not accessible to be pulled out, pull
up the green lever, and remove the
jammed paper.
jam first. Randomly pulling out the
trays may tear the jammed paper,
and any torn pieces of paper
remaining in the machine may
eventually cause the machine to
malfunction.
• Do not leave any torn pieces of
paper inside the machine.
Paper Jams
106

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 5016Workcentre 5020/bWorkcentre 5020/db

Table of Contents