Printing; Setting Up The Printer; Setting The Printer Preferences - Xerox WorkCentre 5020 User Manual

7 Printing

This chapter describes the basic flow of a print job, starting from setting up the printer,
and the basic printing procedure.
Important

Setting Up the Printer

This section describes how to set up the printer preferences and how to specify the
custom paper size.

Setting the Printer Preferences

The following procedure describes how to specify the printer preferences.
1.
Select [Start] at the bottom of the screen, then select [Printers and Faxes].
The [Printers and Faxes] dialog box appears.
2.
Right-click on the [Xerox WorkCentre 5016], [Xerox WorkCentre 5020/B], or
[Xerox WorkCentre 5020/DB] printer, and select [Properties] from the displayed
pop-up menu.
Note
The [Properties] dialog box appears.
3.
Click [Printing Preferences].
Xerox WorkCentre 5016/5020 User Guide
• You must install the print driver in advance. For information on how to install the print
driver, refer to "Installing the Print Driver and the Scan Driver (TWAIN driver)" (P.34).
• Because this procedure to open the [Properties] dialog box uses Windows XP as an
example, you may have to open the [Properties] dialog box in different ways,
depending on the operating system in use. Refer to a guide provided with the operating
system for more information.
78