Xerox WorkCentre 5020 User Manual page 103

Hide thumbs Also See for WorkCentre 5020:
Table of Contents

Advertisement

If the paper is jammed around the Fuser
1) Pull down the latches.
2) Remove the jammed paper.
Note
3) Return the latches back to their
4) Gently close the Left Side Cover.
If the paper is jammed within the Left Side Cover
1) If the paper is jammed in the
2) If the paper is jammed in the
3) If the paper is jammed in the
Note
4) Gently close the Left Side Cover.
Xerox WorkCentre 5016/5020 User Guide
• Do not leave any torn pieces of
paper inside the machine.
original position.
location shown in the diagram,
remove the jammed paper pulling
upwards.
location shown in the diagram,
remove the jammed paper pulling
upwards.
location shown in the diagram, and
if the edges of the jammed paper is
not accessible to be pulled out, pull
up the green lever, and remove the
jammed paper.
• If the paper is still jammed tightly
even after pulling up the green
lever, open Access Cover 1. This
may release the jammed paper
loose, allowing you to remove it.
Paper Jams
103

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 5016Workcentre 5020/bWorkcentre 5020/db

Table of Contents