Xerox WorkCentre 5020 User Manual page 58

If the document is 11 x 17" SEF, 8.5 x 14" SEF, or 8.5 x 13" SEF
(A3 SEF or B4 SEF if the measuring unit is in metric)
4-up
Making
4-up copies
2-up
Making
2-up copies
Note
Important
Xerox WorkCentre 5016/5020 User Guide
• The measuring unit can be switched between metric and inches when the machine is
in the System Setting Mode (menu number: 15). The following three options change
depending on the selected measuring unit. For more information on the system
settings, refer to "System Settings" (P.123).
Inches: 11 x 17" SEF, 8.5 x 13" SEF, 8.5 x 14" SEF
Metric: A3 SEF, B4 SEF
Select this when the document size is 11 x 17", 8.5 x 14", 8.5 x 13",
A3, or B4, and when scanning documents in the SEF orientation.
Inches: 8.5 x 11" SEF
Metric: A4 SEF, B5 SEF
Select this when the document size is 8.5 x 11", A4, or B5, and when
scanning documents in the SEF orientation.
Inches: 8.5 x 11" LEF
Metric: A4 LEF, B5 LEF
Select this when the document size is 8.5 x 11", A4, or B5, and when
scanning documents in the LEF orientation.
Paper Orientation
<Original Size>
button
Paper Orientation
<Original Size>
button
• The 2-up copies of 8.5 x 14" SEF or 8.5 x 13" SEF cannot be made. A3 SEF, B4 SEF, and
11 x 17" SEF can only be made into the 2-up copies.
• The <Original Size> button is not selectable when using the Document Feeder as the size
of the original document is automatically detected.
in the Tray
LEF
How to Scan
Top
SEF
Left
Bottom
How to Scan
in the Tray
LEF
Top
Left
Bottom
SEF
Making Special Copies
Refer to "Changing the Size and
Orientation of Paper in the Trays" (P.46)
to change the orientation of paper.
Document
Glass
Right
Document
Feeder
Document
Glass
Right
Document
Feeder
Refer to "Changing the Size and
Orientation of Paper in the Trays" (P.46)
to change the orientation of paper.
58