Canceling A Copy Job; Making Special Copies; 4-Up/2-Up Copies (Copying Multiple Pages Onto A Single Sheet) - Xerox WorkCentre 5020 User Manual

Canceling a Copy Job

The following procedure describes how to cancel a copy job.
1.
Press the <Stop> button.

Making Special Copies

This section explains how to make copies using the N-up feature and the ID Card copy
feature.

4-up/2-up Copies (Copying Multiple Pages onto a Single Sheet)

The following procedure describes how to copy multiples pages of documents onto one
side of a single sheet of paper.
1.
Press the <N-up/ID Card Copy> button
to select the N-up feature.
2.
Press the <Original Size> button to
select the original document size, and
load the document in reference to the
charts below.
Note
Xerox WorkCentre 5016/5020 User Guide
4-up
Copies four pages of the original documents onto one side of the
sheet.
2-up
Copies two pages of the original documents onto one side of the
sheet.
• This button is selectable only when
using the Document Glass with the
N-up feature. The button is not
selectable when using the
Document Feeder as the size of
the original document is
automatically detected.
Canceling a Copy Job
<Stop> button
<N-up/ID Card Copy>
button
<Original Size>
button
57