Adjusting The Mirror Position - Canon NP6218 Service Manual

CHAPTER 10 TROUBLESHOOTING
2. Adjusting the Mirror Position (optical distance between No. 1 mirror and No.
2/No. 3 mirror)
1) Keep the mirror positioning tool handy.
(See "4 Assembling the Mirror Positioning Tool on P. 10-17.")
2) Move the No. 1 mirror mount forward, and match the long hole in the front side plate
and the cable fixing screw
3) Loosen the set screw on the pulley.
4) Set the mirror positioning tool
(both front and rear).
5) Attach the scanner cable fixing to the No. 1 mirror mount using two screws
front and rear).
10-16
.
(front)
Figure 10-213
to the No. 1 mirror mount and the No. 2 mirror mount
Mirror positioning tool (front)
Figure 10-214
(front)
Figure 10-215
COPYRIGHT © 1997 CANON INC.
(rear)
Mirror positioning tool (rear)
(front)
(front)
(rear)
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
(both