4. Adjusting the Position of the Mirror
You must always adjust the position of the mirror whenever you have installed the
scanner drive cable.
1) Move the No. 1 mirror mount and the No. 2/No. 3 mirror to the left.
2) Set the mirror positioning tool (front, rear; FY9-3011) as shown.
COPYRIGHT © 1997 CANON INC.
Figure 11-211
Figure 11-212
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
11-13