Canon NP6218 Service Manual page 202

Note:
Detach the covers when cleaning, inspecting, or repairing the inside of the copier
as necessary.
Covers that may be detached merely by removing their respective mounting screws
are omitted from the discussion.
Caution:
When attaching the rear cover, be sure that the harness is housed inside the upper
rear cover so that its portion shown in the diagram will not spring out the cover or
the harness will not come into contact with the connector plate.
COPYRIGHT © 1997 CANON INC.
Right cover
Upper rear cover
Rear cover
Figure 202 cover
Figure 7-203
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
Lower right cover
Lower right back
7-7