Canon NP6218 Service Manual page 128

CHAPTER 4 IMAGE FORMATION SYSTEM
3) Check that the side seal and the container are in firm contact.
4) Push the developing blade unit attachment section all the way against the upper side
and secure it with the screw.
4-52
Figure 4-340
COPYRIGHT © 1997 CANON INC.
*
Some spacers are glued top and
bottom in reverse; however, regardless
of the spacer positions, attach the
unit by pushing it all the way against
the Upper side.
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)