Canon NP6218 Service Manual page 222

CHAPTER 8 INSTALLATION
Step
10 Pull the developing locking
lever toward the front, and turn
it clockwise to release it.
11 Remove the knob, and remove
the dummy drum from the
copier. (Keep the knob for
later.)
12 Remove the screw, and
remove the developing
assembly stopper.
13 Remove the developing
assembly, and check that the
developing cylinder is free of
scratches or dirt.
14 Install the developing assem-
bly, and attach the developing
assembly stopper with a screw.
15 Engage the developing
assembly.
16 Close the copier's top unit.
8-4
Work
COPYRIGHT © 1997 CANON INC.
Remarks
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)