Caution:
Check that the paper registration sensor (PS 6) is properly seated after this
procedure is completed.
2. Detaching the Pick-Up Roller
1) Detach the pick-up roller unit. (See "1. Detaching the Pick-Up Roller Unit" on p. 5-
14.)
2) Remove the E-ring
with the collar.
Caution:
Take care not to drop the pin found toward the rear.
COPYRIGHT © 1997 CANON INC.
Figure 5-706
and the E-ring
Figure 5-707
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
; then, pull out the pick-up roller
together
5-19