Adjustment Method For Standard Mode ( ); Initializing User Mode ( ) - Canon NP6218 Service Manual

9. Selecting the Density Adjustment Method for Standard Mode (
1) Hold down the AE key for 4 sec or more.
• The display indicates "
2) Enter using the keypad so that the display indicates "
3) Press the Start key.
• The display indicates '9-1'.
Selecting the density adjustment method for standard mode
AE (automatic)
Manual
4) Enter or using the keypad to select AE or manual so that the display indicates
the new specification (if manual, indicates '9-0').
5) Press the Start key.
• The new specification is stored, and the display returns to "
6) Press the AE key.
• The copier returns to standby state.
10. Initializing User Mode (
1) Hold down the AE key for 4 sec or more.
• The display indicates "
2) Enter using the keypad so that the display indicates "
3) Press the Start key.
• The display indicates '0-1'.
4) Enter using the keypad.
• The display indicates "
5) Press the Start key.
• User mode is initialized, and the display returns to "
6) Press the AE key.
• The copier returns to standby state.
COPYRIGHT © 1997 CANON INC.
".
Table 1-407
)
".
".
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
".
Settings
9-1
9-0
".
".
".
)
1-17