Ae Adjustment - Canon NP6218 Service Manual

3. AE Adjustment

The copier's AE adjustment is executed in service mode and consists of the following
three types:
• lamp intensity automatic adjustment (No. 301) during AE scans
• copy density (development bias) standard adjustment (No. 302) during AE mode
• copy density (development bias) slope adjustment (No. 303) during AE mode
Item Description
No. 301 Lamp intensity
automatic
adjustment dur-
ing AE scans
No. 302 Copy density
(development
bias) standard
adjustment
during AE
mode
No. 303 Copy density
(development
bias) slope
adjustment
during AE
mode
COPYRIGHT © 1997 CANON INC.
Adjustments
9
Lighter
Copy
5
density
Density
Test Chart
Lighert 9
Copy
density
5
Density
Test Chart
Lighter 9
Copy
density
5
Density
Test Chart
Table 4-201
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
The density is adjusted auto-
matically so that the copy
density will be 5 when mak-
ing copies of the Test Chart.
Density of
Original
If the setting is decreased
in service mode,
If the setting is increased
in service mode,
default: 0
Density of
Original
settings: -26 to +26
If the setting is increased
in service mode,
If the setting is decreased
in service mode,
default: 0
Newspaper Density of
Original
settings: -26 to +26
Remarks
AE copies will be
darker.
AE copies will be
lighter.
copies of a newspaper
will be lighter.
copies of a newspaper
will be darker.
4-29