Canon NP6218 Service Manual page 185

16) Remove the two screws
17) Remove the screw
18) Remove the screw
Caution:
If you are removing the screw
has cooled.
The screw is a special screw; take care not to lose it.
19) Remove the C-ring
Caution:
Do not touch the surface of the heater.
COPYRIGHT © 1997 CANON INC.
, and detach the fixing film motor unit
Figure 6-216
, and detach the cover
, and disconnect the heater connector
, you must first make sure that the heater connector
, and detach the bushing
Figure 6-217
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
.
.
, leaving the fixing heater behind.
.
6-19