Canon NP6218 Service Manual page 146

3) Open the lower right cover.
4) Remove the two screws
Note:
You will have sufficient access to the pick-up roller and the bushing at the rear in
this condition.
5) Push in the pick-up roller
the bushing
COPYRIGHT © 1997 CANON INC.
, and pull out the paper guide plate toward the front.
Figure 5-702
from the direction of step 4) toward the rear, and remove
while lowering it to the lower left.
Figure 5-703
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
5-17