Canon NP6218 Service Manual page 239

4) Insert the bend found at the rear of the heater into the heater mounting slit in the rear
side plate of the cassette feeding unit/pedestal (bottom holder).
5) Open the cover on the front of the cassette feeding unit/module, and fix the mounting
plate 2 in place to the front side plate with two screws (white; M3 6).
COPYRIGHT © 1997 CANON INC.
Figure 8-603
Screws
Figure 8-604
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 INSTALLATION
8-21