Canon NP6218 Service Manual page 379

Note:
Even in down state, the sorter will run a self check and rest if the result is good if
you have switched it off and then on without detaching it from the copier.
* Simply turn off the joint sensor (MS3) to detach the sorter from the copier; you
need not disconnect the communication connector.
** When an E code is indicated.
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 TROUBLESHOOTING
10-115