Canon NP6218 Service Manual page 109

Attach the scanning lamp so that its light-emitting portion (open side) is to the left
when viewed from the front of the copier as shown in Figure 4-306.
Caution:
Do not touch the fluorescent lamp. (Use rint-free paper)
Be sure to adjust the gain and AE whenever you have replaced the fluorescent
lamp. (See p. 10-10.)
• Make sure that the cut-off of the fluorescent heater is correctly oriented in relation
to the intensity adjustment sensor.
COPYRIGHT © 1997 CANON INC.
Figure 4-306 (front view)
Fluorescent heater
Adjustment sensor
Figure 4-307
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
Light-emitting
portion
4-33