Canon NP6218 Service Manual page 119

3. Positioning the Solenoid for the Primary Charging Roller
Make adjustments by loosening the two screws used to fix the solenoid
and moving the solenoid
±0.2 mm when the joint
Caution:
You must make the adjustment whenever you have replaced the solenoid.
COPYRIGHT © 1997 CANON INC.
into the direction of arrow B so that
is butted against point
B
Figure 4-323
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
in Figure 4-323 is 4.0
of the solenoid support
a
= 4.0 ± 0.2
in place
.
4-43