Transfer Charging Assembly - Canon NP6218 Service Manual

CHAPTER 4 IMAGE FORMATION SYSTEM
D. Transfer Charging Assembly
1. Detaching the Transfer Roller
1) Open the front door.
2) Open the copier's top body.
3) Detach the static eliminator.
4) Detach the bushing
Caution:
Do not touch the surface of the roller.
Do not soil the surface of the roller.
2. Attaching the Drum Heater
1) Detach the front cover.
2) Open the copier's top body by operating the copier open/close lever.
3) Detach the inside cover.
4) Remove the three fixing screws
4-44
, and lift the transfer roller
Figure 4-324
Figure 4-325
COPYRIGHT © 1997 CANON INC.
to detach.
, and detach the harness cover
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.