CHAPTER 10 TROUBLESHOOTING
6. Positioning the Change Solenoid
Make adjustments by loosening the two screws
the direction of b by the arm
the direction of B, i.e., when the E-ring comes into contact with the solenoid.
a
b
10-20
when the steel core
Figure 10-222
COPYRIGHT © 1997 CANON INC.
so that the gear
of the solenoid is fully pushed in
A
B
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
butts against