Canon NP6218 Service Manual page 225

Step
13 Turn on the power.
14 Execute 'No. 412' in service
mode.
• Press the service mode
swicth (SW302), '4' on the
keypad, AE key, '1' and '2' on
the keypad, and Start key in
sequence.
15 Set the settings for user mode
and settings mode in service
mode to suit the needs of the
user.
16 Tailor the cassette to suit the
desired size by operating the
size guide plate and size
detecting lever; then, attach
the size label.
17 Put copy paper in the cassette,
and set the cassette in the
copier.
18 Attach the copy tray.
19 Remove the door switch acti-
vator, and close the front door.
COPYRIGHT © 1997 CANON INC.
Work
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
The copier automatically sets the APVC value; it
stops in about 23 sec.
See "E. Changing the Size."
• Make sure that the Add Paper message turns off.
• Make sure that the paper indicator matches with
the APVC value; it stops in about 23 sec.
size of the cassette.
• Press the keys on the control panel other than
the Copy Start key to make sure that all
respective operations are normal.
CHAPTER 8 INSTALLATION
Remarks
8-7