Copying
Stapling Copies
If your printer has a finisher, you can have your copies automatically stapled after they are printed.
To select stapling:
1. Access the Copy tab on the touch screen.
2. If the original is:
a. Portrait orientation, select 1 Staple (Portrait) under Copy Output. The staple is placed in the
upper-left corner of the page.
b. Landscape orientation, select 1 Staple (Landscape) under Copy Output. The staple is placed
in the upper-right corner of the landscape image.
Image Quality Adjustments
Use the Image Quality tab to change the following image quality settings:
•
Specifying the Original Type
•
Adjusting the Darkness, Sharpness, and Saturation
•
Automatically Suppressing Background Variations
•
Adjusting the Contrast
•
Selecting Color Presets
•
Adjusting the Color Balance
Specifying the Original Type
The scanner optimizes the image quality of the copies based on the type of images in the original
document and how the original was created.
To specify the original type:
1. Access the Copy tab on the touch screen, and then press the Image Quality tab.
2. Press the Original Type button.
3. In the Original Type window:
a. On the left side of the window, select the content type in the original document.
b. If available, select how the original was produced.
c. Press the Save button in the upper-right corner of the window.
Adjusting the Darkness, Sharpness, and Saturation
You can lighten or darken the image quality of the copies. You can also adjust the sharpness and
saturation of the copies.
To adjust these image options:
1. Access the Copy tab on the touch screen, and then press the Image Quality tab.
2. Press the Image Options button.
88
WorkCentre 6400 Multifunction Printer
User Guide
on page 88
on page 89
on page 89
on page 90
on page 88
on page 89