Table of Contents
Advertisement
show version
show version
To display the configuration of the system hardware, the software version, the names and sources of
configuration files, and the boot images, use the show version command in user EXEC or privileged
EXEC mode.
Syntax Description
This command has no arguments or keywords.
Defaults
Display output without page breaks and remove passwords and other security information.
Command Modes
User EXEC, Privileged EXEC
Command History
Release
10.0
12.1(1a)T1
Examples
The following is sample output from the show version command for a Cisco uBR7246 VXR with the
cable clock card installed:
Router# show version
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (UBR7200-P-M), Version 12.1(10)EC, RELEASE SOFTWARE
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 02-Feb-00 16:49 by ccai
Image text-base:0x60008900, data-base:0x61192000
ROM:System Bootstrap, Version 12.0(15)SC, RELEASE SOFTWARE
VXR1 uptime is 2 days, 1 hour, 24 minutes
System returned to ROM by power-on at 10:54:38 PST Sat Feb 5 2000
System restarted at 11:01:08 PST Sat Feb 5 2000
System image file is "slot1:ubr7200-p-mz.121-0.8.T"
cisco uBR7246VXR (NPE300) processor (revision B) with 122880K/40960K bytes of memory.
Processor board ID SAB0329005N
R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
6 slot VXR midplane, Version 2.0
Last reset from power-on
X.25 software, Version 3.0.0.
National clock card with T1 controller
1 FastEthernet/IEEE 802.3 interface(s)
2 Cable Modem network interface(s)
125K bytes of non-volatile configuration memory.
Cisco Broadband Cable Command Reference Guide
3-262
show version
Modification
This command was introduced.
This command was modified to include information about the cable clock
card.
Chapter 3
Cisco CMTS Show Commands
OL-1581-08
Advertisement
Table of Contents
