Table of Contents
Advertisement
crypto ipsec client ezvpn connect
crypto ipsec client ezvpn connect
To connect to a specified IPSec VPN tunnel in a manual configuration, use the
ezvpn connect
this command.
Syntax Description
name
Defaults
No default behavior or values
Command Modes
Privileged EXEC
Command History
Release
12.2(8)YJ, 12.2(15)T
Usage Guidelines
This command is used with the
designated, the Cisco Easy VPN Remote feature waits for a command or API call before attempting to
establish the Cisco Easy VPN Remote connection.
If the configuration is manual, then the tunnel is connected only after the
connect
subcommand is entered.
Examples
The following example shows how to connect an IPSec VPN tunnel named ISP-tunnel on a
Cisco uBR905/uBR925 cable access router:
Router# crypto ipsec client ezvpn connect ISP-tunnel
Related Commands
Command
clear crypto ipsec
client ezvpn
crypto ipsec client
ezvpn xauth
crypto ipsec client
ezvpn (global
configuration)
Cisco Broadband Cable Command Reference Guide
6-36
command in privileged EXEC mode. To disconnect the VPN tunnel, use the no form of
crypto ipsec client ezvpn connect
no
crypto ipsec client ezvpn connect
Identifies the IPSec VPN tunnel with a unique, arbitrary name.
Modification
This command was introduced on Cisco 806, Cisco 826, Cisco 827, and
Cisco 828 routers; Cisco 1700 series routers; and Cisco uBR905 and
Cisco uBR925 cable access routers.
name command is entered in privileged EXEC mode, and after the
Description
Resets the Cisco Easy VPN Remote state machine and bring down the
Cisco Easy VPN Remote connection.
Responds to a pending VPN authorization request.
(Global configuration mode) Creates a Cisco Easy VPN Remote
configuration.
name
name
[
|
] subcommand. After the manual setting is
connect
auto
manual
Chapter 6
Cable CPE Commands
crypto ipsec client
crypto ipsec client ezvpn
[
] |
connect
auto
manual
OL-1581-07
Advertisement
Table of Contents
