Table of Contents
Advertisement
show crypto engine configuration
show crypto engine configuration
To display the configuration information for the router's onboard hardware accelerator engine, use the
show crypto engine configuration command in privileged EXEC mode.
Cisco uBR905, uBR925 cable access routers
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Release
11.2
12.1(3)XL
12.2(2)XA
Usage Guidelines
This command displays the version, capabilities, and other information for the hardware accelerator
engine that performs IPSec encryption/decryption for the router.
Examples
The following example shows typical output from the show crypto engine configuration command:
Router# show crypto engine configuration
Crypto Adjacency Counts:
Router#
Table 6-22
Cisco Broadband Cable Command Reference Guide
6-152
show crypto engine configuration
Modification
This command was introduced for the Cisco 7200, RSP7000, and
7500 series routers.
Support was added for the Cisco uBR905 cable access router.
Support was added for the Cisco uBR925 cable access router.
crypto engine name:
crypto engine type:
hifn chip id:
hifn rev
:
hifn api rev:
Compression:
3 DES:
Privileged Mode:
Maximum buffer length:
Maximum DH index:
Maximum SA index:
Maximum Flow index:
Maximum RSA key size:
Lock Count:
Unlock Count:
describes the fields shown in this display.
unknown
ISA/ISM
8
0
0.22.0
No
Yes
0x0000
4096
0010
0020
0040
0256
0
0
Chapter 6
Cable CPE Commands
OL-1581-07
Advertisement
Table of Contents
