Table of Contents
Advertisement
crypto ipsec client ezvpn (global configuration)
Router(config)# interface c0
Router(config-if)# crypto ezvpn telecommuter-client
Router(config-if)# exit
Router(config)#
Specifying the mode client option as shown above is optional, because this is default configuration for
Note
these options.
The following example shows the Cisco Easy VPN Remote configuration named telecommuter-client
being removed from the interface and then deleted:
Router# config t
Router(config)# int e1
Router(config-if)# no crypto ipsec client ezvpn telecommuter-client
Router(config-if)# exit
Router(config)# no crypto ipsec client ezvpn telecommuter-client
Router(config)#
Related Commands
Command
clear crypto ipsec
client ezvpn
crypto ipsec client
ezvpn xauth
crypto ipsec client
ezvpn (interface
configuration)
crypto ipsec client
ezvpn connect
ip http ezvpn
Cisco Broadband Cable Command Reference Guide
6-32
Description
Resets the Cisco Easy VPN Remote state machine and bring down the
Cisco Easy VPN Remote connection.
Responds to a pending VPN authorization request.
(Interface configuration mode) Assigns a Cisco Easy VPN Remote
configuration to an interface.
Manually connects to a specified IPSec VPN tunnel.
Enables the Cisco Easy VPN Remote web server interface.
Chapter 6
Cable CPE Commands
OL-1581-07
Advertisement
Table of Contents
