Table of Contents
Advertisement
meminfo
meminfo
To display information about the available range of main memory and Flash memory, use the meminfo
command in ROM monitor mode.
Syntax Description
This command has no arguments or keywords.
Defaults
No default behavior or values.
Command Modes
ROM monitor
Command History
Release
11.3 NA
12.1(5)EC
12.2(4)BC1
Usage Guidelines
The meminfo command displays the size of available main memory, its starting address, the size of
available packet memory, and the size of nonvolatile Flash memory.
Examples
The following example shows how to display information about the current memory usage:
rommon 9 > meminfo
Main memory size: 512 MB.
Available main memory starts at 0xa000e000, size 0x7ffc8 KB
NVRAM size: 0x80000
rommon 10 >
Related Commands
Command
boot
sysreset
Cisco Broadband Cable Command Reference Guide
A-32
meminfo
Modification
This command was introduced on Cisco uBR7200 series routers.
Support was added for Cisco uBR7100 series routers.
Support was added for the Cisco uBR10012 router. Changes were also made
to the boot procedure after breaking into ROMMON to ensure that all
hardware and software registers are in a known state before loading the new
image.
Description
Boots the router manually.
Displays the return information from the system image that was last booted.
Appendix A
Using the ROM Monitor
OL-1581-07
Advertisement
Table of Contents
