show tech-support
In Cisco IOS Release 12.2(8)T and later releases, you can add a timestamp to show commands using the
Tip
exec prompt timestamp command in line configuration mode.
Related Commands
Command
show running-config
show startup-config
show version
Cisco Broadband Cable Command Reference Guide
6-176
Description
Displays the current run-time configuration.
Displays the configuration that was used to initially configure the
CMTS at system startup.
Displays the configuration of the system hardware, the software
version, the names and sources of configuration files, and the boot
images.
Chapter 6
Cable CPE Commands
OL-1581-07