Cisco SR2016T-NA Reference Manual page 1124

Reference guide

Hide thumbs Also See for SR2016T-NA:

Table of Contents

show controllers cable-modem qos

To display detailed information about the Quality of Service (QoS) configuration for the router, use the

show controllers cable-modem qos command in privileged EXEC mode.

Cisco uBR905, Cisco uBR924, and Cisco uBR925 cable access routers, and Cisco CVA122 Cable Voice Adapter

Syntax Description

Command Modes

Privileged EXEC

Command History

12.0(7)XR and 12.1(1)T This command was introduced for the Cisco uBR924 cable access router.

Usage Guidelines

When the cable modem is operating in DOCSIS 1.0 or DOCSIS 1.0+ mode, this command displays the

four possible stream queues, the Service ID (SID) associated with each queue (if the queue is currently

in use), and whether the SID is the primary SID, a secondary (static) SID, or a dynamic (on demand)

SID. The display also shows the packets and bytes that have been transmitted and received on each

When the cable modem is operating in DOCSIS 1.1 mode, this command also displays the modem's

capabilities and packet classifiers.

The following example shows typical output for a DOCSIS 1.0 or DOCSIS 1.0+ cable modem for the

QoS statistics for each of the router's four queues:

Router# show controllers cable-modem 0 qos

Cisco Broadband Cable Command Reference Guide

show controllers cable-modem number qos [details]

Identifies the cable interface (always 0).

(Optional) Displays detailed information, including classifier information.

Modification

Support was added for the Cisco uBR905 cable access router.

Support was added for the Cisco CVA122 Cable Voice Adapter.

Support was added for the Cisco uBR925 cable access router.

Support for DOCSIS 1.1 and BPI+ operation was added for the

Cisco uBR905 and Cisco uBR925 cable access routers, and the

Cisco CVA122 Cable Voice Adapter. The details option was also added.

Cable CPE Commands

Broadband cable